ENG - 20
Connecting an SWA-W500 (Sold Separately)
1.
Turn off the Soundbar by pressing the
(Power)
button on the remote control.
VOL
WOOFER
SOUNDBAR
SOUND
MODE
PAIR
Red
Blinks X3
2.
Plug in the Wireless Subwoofer, and then check its standby status.
•
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless
Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the
Wireless Subwoofer blinks. If the LED does not blink, press the
ID SET
button on the rear of the
Wireless Subwoofer with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue).
For more about the LED, please refer to the SWA-W500 user manual.
Rear of the Wireless Subwoofer
POWER
ID SET
POWER
ID SET
Front of the Wireless Subwoofer
POWER
ID SET
POWER
ID SET
Blue blinking
POWER
ID SET
ID SET
5 Sec
• The main unit is heavy. Be careful not to pinch your fingers when pressing the
ID SET
button or
connecting the power cord to the rear of the unit.
•
The upper part of the subwoofer is prone to scratches. Handle it carefully.
Speaker Unit
Bottom of the Wireless Subwoofer
•
Do not press on or strike the
Speaker Unit
on the bottom of
the body. You can deform or
damage the speaker.
