Samsung HW-S50A, Full Manual

Page: 13 / 182

ENG - 13
(Sound Control)
By pressing the button, you can select the desired audio mode. The desired settings can be adjusted
using the
Up / Down buttons. Each time the mode changes, the Multicolour LED blinks in white.
LED
Indicator
White Blinks X1
“ Treble ”

“ Bass ”

“ Sync ”

“ Centre Level ”
– To control the volume of the treble or bass sound, select “ Treble ”, “ Bass ”, “ Sync ”, or “ Centre Level ” in
Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
7 Band EQ
Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/
Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to “ Standard ”.)
7 Band EQ
VOL WOOFER
SOUND
MODE
PAIR
5 Sec
Press and hold the (Sound Control) button
for about 5 seconds.
Using the Left / Right buttos and each can be
adjusted to setting between -6 to+6.
“ 150Hz ”
“ 150Hz ”  “ 300Hz ”  “ 600Hz ”  “ 1.2kHz ” 
“ 2.5kHz ”  “ 5kHz ”  “ 10kHz ”
– To control the volume of the each speaker select “ Centre Level ” in Sound Settings, and then adjust
the volume between -6~+6 by using the Up/Down buttons.
– If the video on the TV and audio from the Soundbar are not synchronised, select “ Sync ” in Sound
Control, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.
(Not available in “ USB ” or “ Bluetooth ”mode.)
– “ Sync ” is only supported for some functions.