Samsung HW-R450, User Manual

Page: 16 / 64

ENG - 10
Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the Left button on the remote control for 5 seconds to turn Auto Power
Link on or off.
• Auto Power Link is set to ON by default.
(To turn off this function, hold the
Left button on the remote for 5 seconds.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the “ D.IN ” mode.
Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
SOUN
D
MOD
E
PAIR
OR
The initial connection
1. Press the PAIR button on the remote control to enter the “ BT PAIRING ” mode.
(OR)
a. Press the (Source) button on the right side panel and then select “ BT ”.
“ BT ” changes to “ BT READY ” in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When “ BT READY ” appears, press and hold the (Source) button on the right side panel
of the Soundbar for more than 5 seconds to display “ BT PAIRING ”.
2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
3. Select “ [AV] Samsung Soundbar R4-Series ” from the list on TV’s screen.
An available Soundbar is indicated with “ Need Pairing ” or “ Paired ” on the TV’s Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [ TV Name ] → “ BT ” appears on the Soundbar’s front display.
4. You can now hear TV sound from the Soundbar.