ENG - 11
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
CH LEVEL
By pressing the button, you can adjust the volume of the each speaker.
•
Press the button to select
CENTER LEVEL
or
TOP LEVEL
and then adjust the volume
between -6~+6 by using the
Up/Down
buttons.
•
If the Rear Speakers (sold separately) are connected, the setting
REAR LEVEL
is
supported. To adjust the volume of the
REAR LEVEL
between -6 to +6 by using the
Up/
Down
buttons.
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Sound Control
By pressing the button, you can set the audio function. The desired settings can be
adjusted using the
Up/Down
buttons.
VOICE ENHANCE ON/OFF
NIGHT MODE ON/OFF
SYNC
VIRTUAL ON/OFF
–
VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
–
NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.
–
SYNC
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control)
button to select
SYNC
and then set the audio delay between
0~300 milliseconds by using the
Up/Down
buttons. (Not available in “
USB
” or “
BT
”
mode.)
–
VIRTUAL ON/OFF
Dolby Virtual function can be turned
ON/OFF
.
•
The
VOICE ENHANCE
,
NIGHT MODE
, and
VIRTUAL
audio function can be turned
ON/
OFF
by using the
Up/Down
buttons. (
VIRTUAL
function is not available in “
USB
” or “
BT
”
mode.)
•
Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the
Left/Right
buttons and each can be adjusted to a setting between
-6 to +6 using the
Up/Down
buttons. (Make sure the Sound mode is set to “
STANDARD
”.)
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Bluetooth
PAIR
Switch the Soundbar to Bluetooth pairing mode.
Press the
PAIR
button and wait for the “
BT PAIRING
” screen to connect to a new
Bluetooth device.
Play / Pause
VOL
WOOFER
SOUND
MODE
PAIR
You can also play or pause music by pressing the button.
