ENG - 24
ENG - 25
11 troUBLeSHootInG
Before seeking assistance, check the following.
the unit will not turn on.
Is the power cord plugged into the outlet?
;
Connect the power plug to the outlet.
a function does not work when the button is pressed.
Is there static electricity in the air?
;
Disconnect the power plug and connect it again.
Sound dropouts occur in Bt mode.
;
See the Bluetooth connection sections on pages 10 and 15.
Sound is not produced.
Is the Mute function on?
;
Press the
VoL
button to cancel the function.
Is the volume set to minimum?
;
Adjust the Volume.
the remote control does not work.
are the batteries drained?
;
Replace with new batteries.
Is the distance between the remote control and Soundbar main unit too far?
;
Move the remote control closer to the Soundbar main unit.
the red LeD on the subwoofer blinks and the subwoofer is not producing sound.
this issue can occur if the subwoofer is not connected to the Soundbar main unit.
;
Try to connect your subwoofer again. (See page 6.)
the subwoofer drones and vibrates noticeably.
try to adjust the vibration of your subwoofer.
;
Push the
Woofer
button on your remote control up or down to adjust the subwoofer volume.
(between -12, -6 ~ +6).
12 LICenCe
Manufactured under licence from Dolby
Laboratories. Dolby, Dolby Audio and the
double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS
Licencing Limited. DTS, the Symbol, & DTS and
the Symbol together are registered
trademarks, and DTS 2.0 Channel is a
trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licencing LLC in the United States and other
countries.
13 oPen SoUrCe
LICenCe notICe
To send inquiries and requests regarding open
sources, contact Samsung via Email
([email protected]).
14 IMPortant
noteS aBoUt
SerVICe
•
Figures and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
•
An administration fee may be charged if
either
(a) an engineer is called out at your request
and there is no defect with the product (i.e.
where the user manual has not been read).
(b) you bring the unit to a repair centre and
there is no defect with the product (i.e.
where the user manual has not been read).
•
You will be informed of the administration fee
amount before a technician visits.
Summary of Contents for HW-M4501
Page 1: ...HW M4501 USER MANUAL...
