ENG - 16
ENG - 17
What are the Bt reaDy and Bt PaIrInG statuses?
•
Bt reaDy
: In this mode, you can search for previously connected TVs or connect to the Soundbar
from a previously connected mobile device
•
Bt PaIrInG
: In this mode, you can connect to a new device. (While in “
Bt
” mode, press and hold the
(Source)
button for more than 5 seconds on the top panel of the Soundbar or on the remote
control.)
noteS
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 10 meters.
•
The Soundbar automatically turns off after 5 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the Bluetooth device
Press the
(Source)
button on the top panel or on the remote control, and then change to any mode
except “
Bt
”.
•
Disconnecting takes time because the Bluetooth device must receive a response from the
Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
•
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
“
Bt DISConneCteD
” on the front display.
08 USInG tHe reMote ControL
How to Use the remote Control
Surround
VOL
WOOFER
SOUNDBAR
SOUND
MODE
Bluetooth
POWER
Power
Surround
VOL
WOOFER
SOUND
MODE
Bluetooth
POWER
Turns the Soundbar on and off.
Sound Control
Surround
VOL
WOOFER
SOUND
MODE
Bluetooth
POWER
You can select from
treBLe
,
BaSS
, or
aUDIo
SynC
.
•
To control the volume of the treble or bass
sound, select
treBLe
or
BaSS
in Sound
Settings, and then adjust the volume
between -6~+6 by using the
Up/Down
buttons.
•
If the video and audio between the TV and
your Soundbar are not synchronised, select
aUDIo SynC
in Sound Settings, and then
set audio delay between 0~300
milliseconds by using the
Up/Down
buttons. (Except “
USB
” mode)
•
Audio Sync is only supported in some
functions.
Surround
Surround
VOL
WOOFER
SOUND
MODE
Bluetooth
POWER
The Surround Sound function adds depth and a
sense of space to sound.
Each time you press this button, ON and OFF
alternate.
•
ON : Play sound over all the speakers.
•
OFF : You can hear the sound of the original
source channel from several speakers.
SoUnD MoDe
Surround
VOL
WOOFER
SOUND
MODE
Bluetooth
POWER
You can select the desired sound effect by choosing
StanDarD
,
MUSIC
,
CLear VoICe
,
SPortS
, or
MoVIe
.
•
DrC (Dynamic range Control)
Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the
SoUnD MoDe
button while in standby mode, DRC (Dynamic Range Control) turns on
or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)
Summary of Contents for HW-M4501
Page 1: ...HW M4501 USER MANUAL...