ENG - 18
ENG - 19
Wallmount components
430
Wall Mount Guide
Holder-fix Mount
(2 ea)
bracket-Wall
(2 ea)
1.
Place the
Wall Mount Guide
against the wall
surface.
• The
Wall Mount Guide
must be level.
• If your TV is mounted on the wall, install
the Soundbar at least 5 cm below the TV.
5 cm or more
2.
Mark the location where the screws will go
through on the wall, and then remove the
Wall Mount Guide
. Next, drill holes for the
screws using an appropriately sized drill bit.
Center Line
Center Line
3.
Fasten the 2
bracket-Wall
pieces firmly to
the wall at the marked locations using the
appropriate screws.
4.
Attach the Soundbar to the 2
bracket-Wall
pieces as shown in the illustration.
5.
Insert a
Holder-fix Mount
into each hole on
the product’s bottom side. Tighten each
Holder-fix Mount
to fix the Soundbar to the
2
bracket-Wall
pieces.
DC 19V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
5V 0.5A
• Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
• When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
• For the optimal performance of a wall mount
installation, install the speaker system at
least 5 cm below the TV, if the TV is mounted
on the wall.
• For your safety, if you do not mount the unit
on the wall, install it on a secure, flat surface
where it is unlikely to fall.
Summary of Contents for HW-M4500
Page 1: ...HW M4500 USER MANUAL ...
