Samsung HW-M360, User Manual

Page: 10 / 52

ENG - 6 ENG - 7
Manually connecting the subwoofer if automatic connection fails
check before performing the manual connection
• Check whether the power cables for the Soundbar and subwoofer are connected properly.
• Make sure that the Soundbar is turned on.
1. Press and hold ID Set on the rear of the subwoofer for at least 5 seconds.
The red indicator on the top of the subwoofer turns off and the blue indicator blinks.
ID SET
POWER
ID SET
5 Sec
rear of the Subwoofer top of the Subwoofer
2. Turn off the Soundbar.
3. Press and hold the VoL button on the remote control for at least 5 seconds with the Soundbar
turned off (OFF).
4. The ID Set message appears on the display of the Soundbar for 1.3 seconds, and then disappear.
Sur
rou
nd
SOU
ND
MO
DE
Blue
toot
h
POW
ER
VOL
WOOFE
R
SOUNDB
AR
5 Sec
ID Set
5. When the blue indicator on the subwoofer blinks, turn on the Soundbar’s power by pressing
(Power) button on the right side of the main unit or on the remote control.
6. When the connection is successfully established, the blue indicator on the top of the subwoofer
stops blinking and glows continuously.
• If the connection process fails, the blue indicator will flash continuously. Go to Step 1 and start again.
expand to true wireless surround sound by connecting the Samsung Wireless rear Speaker
Kit (SWa-8500S) to your Soundbar (Sold separately). for more information, see the
Samsung Wireless rear Speaker Kit manual.
04 connectInG to your tV
Hear TV sound from your Soundbar through wired or wireless connections.
• When the Soundbar is connected to a selected Samsung TVs, the Soundbar can be controlled using
the TV’s remote control.
– When using optical cable, this feature can be supported by 2017 Samsung Smart TVs that
support Bluetooth.
– This function also allows you to use the TV menu to adjust the sound field and various settings
as well as the volume and mute.
Method 1. connecting with a cable
connecting using an optical cable
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
OPTICAL OUT
optical cable
bottom of the Soundbar
D.In
right Side of the Soundbar
1. Connect the DIGItaL auDIo In (oPtIcaL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable.
2. Press the (Source) button on the right side panel or remote control, and then select mode
“ D.In ”.
• When the Soundbar is connected to a Samsung smart TV released in 2017 or later, the
Bluetooth POWER function automatically turns on to enable the Soundbar to be controlled with
the TV remote control. (See page 14 for details on Bluetooth POWER.)