Samsung HW-J250, Manual, Page: 16 / 19

TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connect ed to a Samsung TV that supports the TV
SoundConnect function.
▶ Connecting a TV to the Soundbar
Connect
1. Turn on the TV and Soundbar.
●
Set the "Add New Device" menu selection of
the TV to "On".
2. Press the ( ) button on the main unit’s top
panel or the TV SOUND CONNECT button on
the remote control to select the TV mode.
●
The Green LED will blink indicating that
TV is not connected yet.
3. On the TV, a message asking whether to enable
the TV SoundConnect function appears.
"[Samsung] Soundbar" is displayed on the TV
screen.
4. Select <Yes> using the TV remote to finish
connecting the TV and Soundbar.
●
The Green LED will stop blinking when
the TV has successfully connected.
●
Switching the Soundbar’s mode from TV
to another mode automatically terminates
TV SoundConnect.
●
To connect the Soundbar to another TV,
the existing connection must be
terminated.
●
To terminate the existing connection,
press and hold the
& button on the
remote for 5 seconds to connect to the
other TV, follow Steps 1 through 4 above.
●
The TV SoundConnect (SoundShare)
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
SoundConnect (SoundShare) function
before you begin. (For further information,
refer to the TV’s user manual.)
●
If your Samsung TV was released before
2014, check the SoundShare setting menu.
●
If the distance between the TV and
Soundbar exceeds 5m, the connection
may not be stable or the audio may
stutter. If this occurs, relocate the TV or
Soundbar so that they are within
operational range, and then re-establish
the TV SoundConnect c onnection.
●
TV SoundConnect Operational Ranges:
- Recommended pairing range: within
50cm
- Recommended operational range:
within 5m
●
The Play/Pause, Next, Prev buttons are
not operable in TV SoundConnect mode.
▶
Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after
you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. The Green or Red
, ,
and Green LEDs appear on the Soundbar's
display.
●
Green : The Soundbar turns on and off
when you turn the TV on or off.
●
Red : The Soundbar only turns off when
you turn the TV off.
●
This function is supported by some
Samsung TVs released from 2013 on.
HW-J250
DIGITAL
AUDIO OUT
(OPTICAL)
TV
Sound
Connect
[Samsung] Soundbar
Blink
Bluetooth
POWER