ENG - 21
VOL
WOOFER
SOUND
MODE
PAIR
Bluetooth
PAIR
Press the
PAIR
button. “
BT PAIRING
” appears in the Soundbar’s display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Play / Pause
VOL
WOOFER
SOUND
MODE
PAIR
Press the
p
button to pause a music file temporarily.
When you press the button again, the music file plays.
VOL
WOOFER
SOUND
MODE
PAIR
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
•
Repeat
To use the Repeat function in “
USB
” mode, press the
Up
button.
•
Music Skip
Press the
Right
button to select the next music file. Press the
Left
button to select the
previous music file.
•
ID SET
Press and hold the
Up
button for 5 seconds to complete
ID SET
(when connecting to a
wireless subwoofer or wireless rear speakers).
Sound Control
VOL
WOOFER
SOUND
MODE
PAIR
When pressed, the settings
TREBLE
,
BASS
, and
AUDIO SYNC
are displayed in sequence.
The desired settings can be adjusted using the
Up
/
Down
buttons.
•
To control the volume of the treble or bass sound, press the
(Sound Control)
button
to select
TREBLE
or
BASS
and then adjust the volume between -6~+6 by using the
Up/
Down
buttons.
•
Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the
Left/Right
buttons and each can be adjusted to a setting between
-6 to +6 using the
Up/Down
buttons. (Make sure the Sound mode is set to
“
STANDARD
”.)
•
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control)
button to select
AUDIO SYNC
and then set the audio delay
between 0~300 milliseconds
by using the
Up/Down
buttons. (Not available in “
BT
” and
“
USB
” mode.)
•
AUDIO SYNC
is only supported for some functions.
