6
6
Troubleshooting (Con’t)
Symptom
Check/Remedy
Disc is rotating but no
picture is produced.
Picture quality is poor and
picture is shaking.
`
`
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
•
•
•
•
Audio language and subtitles do not
work.
Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
•
Menu screen does not appear even when
the menu function is selected.
Are you using a disc that does not contain menus?
•
Aspect ratio cannot be changed.
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio
only. Refer to the DVD disc jacket and then select the appropriate
function.
•
The main unit is not working.
(Example: The power goes out or
strange noise is heard.)
The DVD player is not working
normally.
`
`
Turn off the power and hold the
STOP(
@
)
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
The password for rating level has been
forgotten.
While <
No Disc>
message appears on the display of main unit, hold
the main unit's
STOP(
@
)
button for longer than 5 seconds.
<INITIAL> appears on the display and all settings will return to the
default values.
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
•
Can't receive radio broadcast.
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM antenna in
an area with good reception.
•
•
Can't receive radio broadcastç
If the eject button is pressed while listening to TV audio using
the D.IN, AUX functions, the DVD functions are turned on and this
stops the TV audio.
•
HT-TKX500_CIS_ENG-0205.indd 76
2008-02-16 �� 1:35:28
