Samsung HT-KX30, Instruction Manual

Page: 8 / 40

14
GB
CONNECTIONS
15
Connecting the Optional Wireless Receiving Ampli fi er
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
Front Speaker (R)
Rear Speaker (L)
Subwoofer
Center Speaker
Front Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
WIRELESS RECEIVER MODULE
Rear Speaker (L) Rear Speaker (R)
Front Speaker (R)
Subwoofer
Center Speaker
Front Speaker (L)
HT-KX30
HT-TKX35
Speaker Installation
You have the option of installing the speakers on Stands, or directly to the Stand Base.
How to Install the Speaker on the Stand
1
Turn the STAND upside-down and connect it to the
STAND BASE.
2
Insert two screws (A) into the two holes marked with
arrows using a screwdriver as shown in the illustration.
3
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
4
Connect the assembled stand to the SPEAKER.
5
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
6
This is the SPEAKER successfully assembled with the
Stand.
Make sure that the speaker is installed on a fl at and stable
area. Otherwise it may be easily knocked over.
How to Install the Speaker on the Stand Base
1
Connect the SPEAKER with the STAND BASE.
2
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
3
This is the SPEAKER successfully assembled with the
Stand Base.
•
3 4
1 2
6 5
Screw (B) Screw (A) STAND BASE STAND SPEAKER
Speaker Components
(HT-TKX35 only)
1 2
3