|
22
English
Basic Functions
V SURROUND
V SURROUND
It is only operational when 2 Channel Audio is
playing. It will change 2 channel Audio Source to 5.1
channel Sound and there is output.
Each time you press the
V-SURROUND
button on
the remote control.
Virtual Surround on
Virtual Surround off
• Virtual Surround on: change 2 channel audio to
5.1 channel and there is Sound output by 5.1
channel.
• Virtual Surround off: Output of 2 channel Audio
is Sound output by 2 channel. (Original Sound).
TV SOUND
TV SOUND
You can listen via Home Theater Speaker or TV Speaker
with TV SOUND button.
1 .
Connect the HDMI cable to TV and Home theater.
2 .
Press the
TV SOUND
button on the remote
control.
3 .
Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D.IN.
-TV SOUND ON : Output to Home Theater
Speaker. -TV SOUND OFF : Output to
connected TV Speaker.
Use in this case:
1) If you want to listen to the sound via home theater
speaker when you watch a TV.
2) If you want to listen to the sound from the USB media
that plugged to the TV via home theater speaker.
TV SOUND ON/OFF support specification
Connected
TV
TV
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
(HDMI-CEC)
supported
TV
ON
O
O
OFF
O
O
(HDMI-CEC)
non-supported
T
V
No opeartion
O
O
Make sure that D.IN function is changed to TV CEC
ON state,otherwise ARC audio is not available .
Listening to Radio
Using buttons on the Remote Control
1 .
Press the
FUNCTION
button to select
FM
.
2 .
Tune in to the desired station.
•
Preset Tuning 1
: You must first add a desired
frequency as a preset. Press the
5
button to
select
PRESET
and then press the
TUNING/CH
(
,.
) button to select the preset station.
•
Manual Tuning
: Press the
5
button to select
MANUAL and then press the
TUNING/CH
(
,.
)
button to tune in to a lower or higher frequency.
•
Automatic Tuning
: Press the
5
button to select
MANUAL
and then press and hold the
TUNING/
CH
(
,.
) button to automatically search the
band.
Setting Mono/Stereo
Press the
MO/ST
button.
• Each time the button is pressed, the sound switches
between
STEREO
and
MONO
.
• In a poor reception area, select
MONO
for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 .
Press the
FUNCTION
button to select FM.
2 .
Press the
TUNING/CH
(
,.
) button to select
<89.10>.
3 .
Press the
TUNER MEMORY
button.
• Number flashes on the display.
4 .
Press the
TUNING/CH
(
,.
) buttons to select
preset number.
• You can select between 1 and 15 presets.
5 .
Press the
TUNER MEMORY
button again.
• Press the
TUNER MEMORY
button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
6 .
To preset another station, repeat steps 2 to 5.
HT-F456K-ENG MIC-04-15.indd 22
HT-F456K-ENG MIC-04-15.indd 22
2013-5-7 15:34:04
2013-5-7 15:34:04
