16
English
Connections
STAND
STAND BASE
SURROUND
(L) (R)
Assembled Speakers
✎
NOTE
Refer to page 17 to install the Speakers on the Tallboy Stand.
Speaker Components
FRONT SPEAKER
SURROUND SPEAKER
(L)
(R)
FRONT
STAND BASE:
PARTITION- STAND
SCREW (5×15): 10EA
SPEAKER CABLE
SUBWOOFER
SUBWOOFER
CENTRE
CENTRE
Installing the Speakers on the Half Tallboy Stand
* Front Speakers(Method 1)
1.
Connect the upper speaker to the Stand base as shown.
2.
Insert a screw (5*15, For connecting Speaker & Stand Base)
clockwise into the hole marked using a screwdriver as shown
in the illustration.
!
CAUTION :
When you use a torque screwdriver, be
careful not to put excessive force. Otherwise, it runs
idle or can be damaged. (torque screwdriver- below 15
kg.f.cm
).
3.
This is the appearance after the speaker is installed.
Follow this steps to install another speaker.
1
2
3
