|
52
English
Media Play
Presetting Stations
Example : Presetting FM 89.10 into memory.
1 .
Press the
FUNCTION
button to select
FM
.
2 .
Press the
TUNING/CH
(
,.
) button to
select <89.10>.
3 .
Press the
TUNER MEMORY
button.
• NUMBER flashes on the display.
4 .
Press the
TUNER MEMORY
button again.
• Press the
TUNER MEMORY
button before
NUMBER disappears from the display on its
own.
• After you press the
TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 .
To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH
(
,.
) button.
About RDS broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station
names, as well as information about what type of
program they broadcast, such as sports or music,
etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
• PTY (Program Type) : Displays the type of
program currently being broadcast.
• PS NAME (Program Service Name) : Indicates
the name of broadcasting station and is
composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by
a station (if any) and is composed of maximum
64 characters.
• CT (Clock Time) : Decodes the real time clock
from the FM frequency. Some stations may not
transmit PTY, RT or CT information therefore
this may not be displayed in all cases.
• TA (Traffic Announcement) : TA ON/OFF it shows
that the traffic announcement is in progress.
|
NOTE
|
RDS may not operate correctly if the station tuned is not
transmitting RDS signal properly or if the signal strength
is weak.
To show the RDS signals
You can see the RDS signals the station sends on
the display.
Press the
RDS DISPLAY
button while listening to
an FM station.
• Each time you press the button, the display
change to show you the following information :
PS NAME
RT
CT
Frequency
PS
(Program
Service)
While searching, <PS NAME> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT
(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
Frequency
Station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper
case and lower case letters and always uses
upper case letters.
• The display window cannot show accented
letters, <A,> for instance, may stands for
accented <A’s> like <À, Â, Ä, Á, Å and Ã.>
HT-E6750W_XU_0222.indd 52
HT-E6750W_XU_0222.indd 52
2012-02-22 오후 2:08:57
2012-02-22 오후 2:08:57
