English
33
|
04
Settings
2 ·
Select
Add Network
on the bottom of the
screen, and then press
E
. Select
Next
, and
then press the
E
button again.
The Add Network Settings screen appears.
3 ·
Use the keypad on your remote to enter the
Wireless Router Name. Select
Next
, and
then press the
E
button when done. The
Security Type screen appears.
|
NOTE
|
Enter numbers in the Wireless Router Name by pressing
the number buttons on your remote.
Enter letters by selecting a letter using the ▲▼◀▶
buttons, and then press
E
button.
To display capital letters (or redisplay small letters if
capital letters are displayed), select
A/a
, and then press
the
E
button.
To display symbols and punctuation, select
, and then
press the
E
button. To redisplay letters, select
A/a
, and
then press the
E
button.
4 ·
Select the Security Code protocol you are
using on your router, and then press the
E
button. Select
Next
, and then press the
E
button again. The Security screen appears.
5 ·
On the Security screen, enter your network’s
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with the ▲▼◀▶
buttons, and then press
E
. For additional
instructions, see the Notes after Step 3.
6 ·
When done, select
Next
at the right of the
screen, and then press
E
.
7 ·
The Network Status screen appears. The
product verifies the network connection and
then connects to the network. When it is
done, highlight
OK
, and then press
E
.
❒
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a
WPS(PBC)
button, follow these steps:
1 ·
Select
WPS(PBC)
in the Network Settings
menu, and then press the
E
button. Select
Next
, and then press the
E
button again.
2 ·
Press the
WPS(PBC)
button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
3 ·
The Network Status screen appears. The
product verifies the network connection and
then connects to the network. When done,
highlight
OK
, and then press
E
.
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1 ·
In the Home screen, select
Settings
, and
then press the
E
button.
2 ·
Select
Network
, and then press the
E
button.
3 ·
Select
AllShare Settngs
, and then press the
E
button.
4 ·
Select a device, and then press the
E
button. The AllShare Settings pop-up
appears.
5 ·
Select
Allow
,
Deny
, or
Delete
from List, and
then press the
E
button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 36~37.