English
31
|
04
Settings
Networks and the Internet
When you connect this product to a network, you
can use network based applications and functions
such as Smart Hub and BD-LIVE and upgrade
the product's software through the network
connection.
Configuring Your Network Connection
Before you begin, contact your ISP to find out if
your IP address is static or dynamic.
If it is dynamic, and you have a wired or wireless
network, we recommend using the Automatic
procedures described below. If you are using
a wireless connection and your router has the
capability, you can also use WPS(PBC).
To start the configuration process, follow these
steps:
1 .
In the Home menu, select
Settings
, and then
press the
E
button.
2 .
Select
Network
, and then press the
E
button.
3 .
Select
Network Settings
, and then press the
E
button.
The Network Settings menu appears.
Wired Network
•
First, Check if the network cable connect to the
product.
❒
Wired – Automatic
Network Settings
Cancel
Start
Network cable connected.
Press Start to configure your wired network settings.
If you want to connect to your wireless network,
unplug the network cable.
1 .
Select the
Start
in the Network Settings
menu. And then press the
E
button.
2 .
The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When
done, highlight
OK
, and then press
E
.
❒
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually.
1 .
Select the
Start
in the Network Settings
menu. And then press the
E
button.
The Network Status screen appears.
The product attempts to verify the network
connection and fails.
2 .
Select
IP Settings
on the right of the screen,
and then press
E
button.
The IP Settings screen appears.
3 .
Select the
IP Mode
field, and then set to
Manual
.
4 .
Use the number keypad on your remote to
enter the Network values. Use the
▲▼◄►
buttons on the remote to move from entry
field to entry field. Select
Next
, and then
press the
E
button.
|
NOTE
|
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Setting Values"
on next page.
5 .
The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When
done, highlight
OK
, and then press
E
.