18
English
Connections
Connecting the Wireless Subwoofer
Connect the power cord on the rear of the subwoofer to the power.
If the main unit is turned on
The subwoofer will be automatically connected to the product and the Link LED on its front will blink
blue for a few seconds.
If the main unit is turned off
The Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will change
to red as the sub switches to STANDBY mode.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core to the power cord
of the Subwoofer, it will help to prevent RF
interference from radio signals.
Pull the fi xing tab of the Toroidal ferrite core to
open it.
Make three loops in the power cable of the
subwoofer.
Attach the Toroidal ferrite core to the Subwoofer
power cord as the fi gure shows and press it
until it clicks.
Connecting the Front Speakers
Press down the terminal tab on the rear of the
speaker.
Insert the black wire into the black terminal (–) and
the red wire into the red (+) terminal, and then
release the tab.
Connect the connecting plugs to the rear of the
subwoofer by matching the colours of the
speaker plugs to the speaker jacks.
•
•
1.
2.
3.
1.
2.
3.
VOL
PS-WD7100
ID SET
R
R
L
L
Front Speaker (L)
Front Speaker (R)
Subwoofer
ID SET
R
L
HT-D7100_ELS_1227.indd 18
HT-D7100_ELS_1227.indd 18
2011-12-27 1:18:40
2011-12-27 1:18:40
