1
English
Connections
English
1
Installing the Speakers on the Tallboy Stand
* HT-D553K/D553WK only - Front Speakers
* HT-D555K/D555WK only - Front/Surround Speakers
Turn the Stand Base upside-down and connect it to the Stand.
Insert small screws (4*20, For connecting Stand & Stand Base)
clockwise into the four holes marked using a screwdriver as
shown in the illustration.
CAUTION :
When you use a torque screwdriver, be careful
not to put excessive force. Otherwise, it runs idle or can be
damaged. (torque screwdriver- below 15 kg.f.cm)
Connect the upper Speaker to the assembled Stand.
Insert another large screw (5*15, For connecting Speaker &
Stand)
clockwise into the hole on the rear of the speaker
using a screwdriver.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
2
4
1
Stand
Stand
Base
3
Stand
Speaker
5
Connecting The Speakers
* HT-D550K/D553K/D555K only
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
Colors of the speaker plugs to the speaker jacks.
1.
2.
3.
Black
Red
NOTE
HT-D550WK/D553WK/D555WK do not have rear speaker connectors on the main unit. The rear speakers
are connected to the Wireless Receiver Module. See pages 19~20.
The rear speakers for HT-D550K/D553K/D555K can also be connected to the Wireless Receiver Module
(SWA-5000) if you purchase it separately. See pages 19~20.
✎
`
`
In case of HT-D550K
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
SPEAKERS OUT
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)
Front Speaker (L)
Center Speaker
Summary of Contents for HT-D550K
Page 48: ......
Page 96: ...Code No AH68 02333W 05 ...
