20
English
Connections
Speaker Components
Assembled Speakers
FRONT
(L) (R)
CENTER
STAND
STAND BASE
SUBWOOFER
¨
CENTER SPEAKER
SUBWOOFER
FRONT SPEAKER
SCREW (5X15): 2EA
SCREW (4X20): 8EA
SPEAKER CABLE
SURROUND
SPEAKER
Installing the Speakers on the Tallboy Stand
Turn the Stand Base upside-down and connect it
to the Stand.
Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
CAUTION
When you use a torque screwdriver, be careful not
to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15
kg.f.cm)
Connect the upper Speaker to the assembled
Stand.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the
rear of the speaker using a screwdriver.
This is the appearance after the speaker is
installed. Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
4
2
Stand
Stand
Base
1
3
Stand
Speaker
5
SURROUND
(L)
(R)
HT-D5330_XAC_0215.indd 20
HT-D5330_XAC_0215.indd 20
2011-02-15 ¿ÀÈÄ 7:38:31
2011-02-15 ¿ÀÈÄ 7:38:31