27
ENG
●
CONNECTIONS
CONNECTING AN iPod
You can enjoy music and video fi les from an iPod through the main unit. For iPod operation with this Blu-ray home
theater, see this page and pages 80 ~ 82.
Connect the iPod Dock to the iPod Jack on the rear side of the main unit.
Place the iPod in the dock.
“iPod Connected” message appears on the TV screen.
You must have the VIDEO output connected to your TV to view iPod video (see page 26).
Adjust the volume to a moderate level before you connect your iPod and Blu-ray home theater.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
Make sure to connect the dock connector so that the label “
SAMSUNG
” faces upward.
1.
2.
•
M
FM ANT.
HDMI IN
WIRELESS SPK
1
2
AUX IN
VIDEO OUT
SPEAKERS OUT
(supplied)
iPod models that can be used with the HT-BD3252
“Made for iPod” means that an electronic accessory has been designed to connect specifically to the
iPod and has been certified by the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect
specifically to an iPhone and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a
trademark of Apple Inc.
M
HT-BD3252A_XAA_0724-1.indd 27
HT-BD3252A_XAA_0724-1.indd 27
2009-07-24 5:27:13
2009-07-24 5:27:13