background image

31

ENG

OPERA

TION

MUSIC

: Provides 7.1 channel surround sound for digital, analog or existing stereo

sources such as CD, TAPE, FM, TV and stereo VCR.

CINEMA

: Adds  realism to the movie soundtrack.

MATRIX

: You will hear 7.1 channel surround sound.

GAME

: Enhances the excitement of the game's sound.

PL

: You will experience a surround effect with just the front left and right speakers.  

Press 

SURROUND 

button  to select “DPLIIx” mode.

Each time you press this button, DPLIIx  

NEO:6 

SFE 

STEREO

will be selected in turn.

Press 

SELECT

(           ) button.

Each time you press 

SELECT (       )

button, CINEMA 

MATRIX 

GAME 

➝ 

PL 

MUSIC will be selected in turn.

Each time you press 

SELECT (       )

button, MUSIC 

PL 

➝ 

GAME 

MATRIX 

CINEMA will be selected in turn.

Dolby Pro Logic llx mode

MAIN UNIT

1

2

,

Dolby Pro Logic llx mode

This mode provides 7.1 channel sound from 2 channel sources.

Press                  

MODE

button.

Each time you press this button, CINEMA 

➝ 

MATRIX 

➝ 

GAME 

➝ 

PL 

➝ 

MUSIC will be selected in turn.

To exit setup mode

Wait for about 5 seconds.

REMOTE CONTROL

You cannot use Dolby Pro Logic llx mode for multi channel signals such as
Dolby Digital and DTS.

Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.

Sound will not be output from the surround back speaker if the PCM audio signal
is mono.

HT-AS720S-XAA-ENG  2007.8.21  6:8 PM  Page 31

Summary of Contents for HT-AS720





















































Reviews: