background image

S

AMSUNG

LIMITED WARRANTY

SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from 

defective material and workmanship.

SEA further warrants that if product fails to operate properly within the specified 

warranty period and the failure is due to improper workmanship or defective material, 

SEA will repair or replace the product at it’s option.

All warranty repairs must be performed by a SEA authorized service center. The name 

and address of the location nearest you can be obtained by calling toll free: 1-800 

SAMSUNG (1-800-726-7864).

Labor

90 days carry-in

Parts

1 year
On carry-in models, transportation to and from the service center is the customer’s 

responsibility.
The original dated sales receipt must be retained by the customer and is the only 

acceptable proof of purchase.

It must be presented to the authorized service center.

EXCLUSIONS (WHAT IS NOT COVERED)

This warranty does not cover damage due to accident, fire, flood and/or other acts 

of God; misuse, incorrect line voltage, improper installation, improper or unauthorized 

repairs, commercial use, or damage that occurs in shipping.

Exterior and interior finish, lamps, and glass are not covered under this warranty.

Customer adjustments which are explained in the instruction manual are not covered 

under the terms of this warranty.

This warranty will automatically be voided for any unit found with a missing or altered 

serial number. This warranty is valid only on products purchased in the United States 

and Puerto Rico.

Some States do not allow the exclusions or limitations of incidental or consequential 

damages, or allow limitations on how long an implied warranty lasts, so the above 

limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which 

vary from State to State.

warranty

Summary of Contents for HMX-R10SN






























































































































































Reviews: