Samsung HMX-QF30BN User Manual Download

Page: 29 / 133

Getting Started

Drag

Drag the touch screen up, down, left, or right to select the desired
items or files.

Manual

Art Film

MobileLink

Ustream

Vertical HD

Recording

Album

Social Sharing

TV Link

•

Touch

Lightly touch items with your finger to select or execute.

STBY

00:00:00 [253Min]

• Do not place any protective film on the LCD screen.
• If you leave a film attached for a long time, strong adhesion between

the film and the surface of the screen may cause a malfunction of
the touch screen.

• Be careful not to accidentally press the button near the LCD screen

while using the touch screen.

• The tabs and icons that appear on the LCD screen depend on the

current recording/playback status of your camcorder.

• The camcorder does not recognize touches if you touch more than two

points on the screen at the same time. Touch one point at a time.

Using the touch screen

The touch screen lets you playback and recording with a simple touch of your finger. Place your hand on the rear side of the LCD screen to
support it. Then, touch the items displayed on the screen.

Summary of Contents for HMX-QF30BN






































































































































Search results

Summary of Contents for HMX-QF30BN

Reviews:

Related manuals for HMX-QF30BN

Brands by name

Popular brands

Samsung HMX-QF30BN, User Manual

Search results

Summary of Contents for HMX-QF30BN

Reviews:

Related manuals for HMX-QF30BN

Brands by name

Popular brands