Troubleshooting
116
Appendixes
Recording
Symptom
Explanation/Solution
During recording, the date/time does not
display.
Date/Time Display
is set to
Off
. Set the
Date/Time Display
to On.
¬
page 102
•
You cannot record a photo image.
Set your camcorder to the photo recording mode.
¬
page 41
Release the lock on the write-protection tab of the memory card if any.
The storage media is full. Use a new memory card or format the storage media.
¬
page 106 Or remove unnecessary images.
¬
page 65
•
•
•
You don’t hear the shutter sound when you
record a photo image.
Set
Shutter Sound
to
On
.
When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the
Shutter Sound is not available.
•
•
You don’t hear the beep sound.
Set
Beep Sound
to
On
.
Beep sound is temporally off while recording videos.
When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the Beep
Sound is not available.
•
•
•
There is a time difference between the point
where you press the [
Recording start/stop
]
button and the point where the recorded video
starts/stops.
On your camcorder, there may be a slight time delay between the point when you press the
[
Recording start/stop
] button and the actual point where the recorded video starts/stops.
This is not an error.
•
Horizontal stripes appear on the images.
This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
•
