background image

74

_ English

Wind Cut (

)

You can reduce wind noise when recording sound from the built-in microphone.
If “

Wind Cut: On

” is set, the low-frequency components in the sound picked up by the microphone will be cut off 

during recording: This makes it easier to hear voice and sound during playback.
•  Use the Wind Cut when recording in windy places such as a beach.

Settings

Contents

On-screen 

display

Off

Disable the function.

None

On

Minimizes wind noise or other noise while recording.

•  When the “

Wind Cut

” is “

On,

” some low frequency sound is eliminated along with the sound of the wind.

•  Make sure the “

Wind Cut

” is set to “

Off

” when you want the microphone to be sensitive as possible.

Digital Zoom (

)

You can select the maximum zoom level in case you want to zoom to a level greater than optical zoom magnification.  
Up to 10x zoom is performed digitally.

This right side of the bar shows the digital zooming factor.  
The zooming zone appears when you select the zooming level.

Settings

Contents

On-screen 

display

Off

Up to 10X zoom is performed optically.

None

On

Up to 10X zoom is performed optically, and after that, up to 10X zoom is performed 
digitally. (Zooming more than 10X is achieved digitally, up to 100X when combined 
with optical zoom.)

None

•  The image quality may deteriorate depending on how much you zoom in on the subject.
•  Maximum zooming may result in lower image quality. 

Summary of Contents for HMX-H1000P

















































































































































Reviews: