Samsung HLR5078WX, Service Manual

Page: 117 / 152

Operation Instruction & Installation
11-4 Samsung Electronics
11-1-5 Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV.
You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box.
17. EXIT
Press to exit the menu.
18.
▲, ▼, ◀, ▶,
ENTER
Press to select highlight up, down, left, or
right. While using the on-screen menus,
press the ENTER to activate (or change) a
particular item.
19. D-Net
Runs the D-Net view function.
20. PIP (Picture In Picture)
Displays the available channels in sequence.
(These buttons change channels in the PIP
window only.)
PIP : When in the TV Guide On Screen,
toggles the state between locked and
unlocked in the Video Window.
21. STILL
Press to pause the current screen.
22. P.SIZE
Press to change the screen size.
23. REC
Records a program in the TV Guide On
Screen
™
.
24. DNIe (Digital Natural Image engine)
Activates DNIe Demo mode.
25. SET
Used during set up of this remote control, so
that it will work compatibly with other devices
(Set-Top box, VCR, Cable box, DVD, etc.)
26. MTS (Multichannel Television Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
27. PIP Controls
CH ∧ ∧ / ∨ ; Press to displays the available
channels in sequence. (These buttons
change channels in the PIP window only.)
28. CAPTION
Controls the caption decoder.
29.
◀◀
/Day-, Day+/
▶▶
Moves forward or backwards in 24 hour
increments in the Listings Grid in TV Guide
On Screen
™
.
30. VCR/DVD Controls
Controls VCR or DVD functions: Rewind,
Stop, Play/Pause, Fast Forward.
31. RESET
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again.
1. POWER
Turns the TV on and off.
2. TV Guide
Press to display the TV Guide On
Screen
™
lnteractive Program Guide
(IPG). (Refer to TV Guide On Screen
™
manual.)
3. ANTENNA
Press to select "AIR" or "CABLE".
4. CHANNEL NUMBER
Press to directly tune to a particular
channel.
5. -
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
"54-3", press "54", then press "-" and "3".
6. VOL +, VOL -
Press to increase or decrease the volume.
7. MUTE
Press to mute the TV sound.
8. Anynet
Runs the Anynet view functions and sets
up Anynet devices.
9. MENU
Displays the main on-screen menu.
10. CH.LIST
Displays the channel list.
11. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
12. MODE
Selects a target device to be controlled by
the Samsung remote control (i.e., TV,
STB, VCR, CABLE, or DVD).
13. PRE-CH
Tunes to the previous channel.
14. SOURCE
Press to display all of the available video
sources (i.e., TV, Set-Top Box, VCR, DVD,
DTV, PC).
15. CH/PAGE
∧/∨
Press to change channels. Moves from
one set of screen information to the next
in the TV Guide On Screen
™
.
16. INFO
Press to display information on the TV
screen.