9
English
1
RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
2
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
3
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
4
USB (5V 0.5A)
,
USB (HDD 5V 1A)/CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
5
HDMI IN 1(DVI), 2(ARC)
Connects to the HDMI jack of a device with an HDMI output.
✎
No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎
Use the
HDMI IN 1(DVI)
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the
PC/DVI AUDIO IN
jacks for audio.
6
PC/ DVI AUDIO IN
Connects to the audio input jacks on an Amplifier/Home Theatre.
7
AV IN 2
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
– Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
– When connecting to
AV IN
, the colour of the
AV IN [Y/VIDEO]
jack (Green) does not match the colour of the video
cable (Yellow).
8
HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
9
HP-ID
Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
See
page 15. When connecting Headphone to Headphone Box, it works same as Headphone function.
0
ANT IN (SATELLITE)
,
(AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
!
PC IN
Connect to the video output jack on your computer.
@
LAN
Connect to a wired LAN using CAT 7 cable.
#
DATA
– Used to support data communication between the TV and the SBB.
– Connects using RJ-12 TV type plugs.
