Samsung HG32ED590HB, Service Manual

Page: 38 / 82

4-2-2. No Video (HDMI 1, 2 - Digital Signal)
Symptom
Audio is normal but no picture is displayed on the screen. •
Major
checkpoints
Check the HDMI source. •
Check the HDMI switch. •
This may happen when the LVDS cable connecting the Main Board and the Panel is •
disconnected.
Diagnostics
Power indicator LED is off.
Lamp(Backlight) on, no video ?
No Check a set in the ‘Stand-by mode’.
Yes
Check the HDMI source and check the
connection of HDMI cable ?
No Input the HDMI signal properly.
Yes
1
Check the signal at Input of Main Board ?
HDMI1 Clk •
Pin #10, #12 of CN501_H2
DATA
-
Pin #7, #9, #4, #6, #1, #3 of
CN501_H2
HDMI2 Clk •
Pin #10, #12 of CN502
DATA
-
Pin #7, #9, #4, #6, #1, #3 of
CN502
No
Check CN501_H2, CN502.
Check HDMI cable.
Change the Main Ass’y.
or
Check IC1001(X14H).
Change the Main Ass’y.
Yes
2
Check the LVDS clk signal at output of
Main Board. (TX)
TX2_CLK : ODD_TXCLK_DN/DP
TX4_CLK : EVEN_TXCLK_DN/DP
No
Check IC1001(X14H).
Change the Main Ass’y.
Yes
Check the LVDS cable?
Replace the T CON / LCD panel?
No Please, Contact tech support.
Caution Make sure to disconnect the power before working on the IP Board.
4-5
4. Troubleshooting