27
English
¦
USB Cloning
USB Cloning is used to download user-configured settings (
Picture
,
Sound
,
Input
,
Channel
,
Setup
, and
Hotel Setup
)
from one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
•
Cloning from TV to USB
: This copies stored data from the TV set to the USB
device.
1.
Insert a USB drive into the USB port on the rear of the TV.
2.
Enter the Interactive menu by pressing buttons in order.
•
MUTE
→
1
→
1
→
9
→
ENTER
3.
Press the
▲
or
▼
button to select “
Clone TV to USB
”, then press the
ENTER
button.
4.
When the message “
Clone TV to USB
” is displayed, press the
ENTER
button.
5.
You can verify USB cloning behavior.
•
In Progress
: during copying data to USB.
•
Completed
: copy was finished successfully.
•
Failed
: copy was not finished successfully.
•
No USB
: USB is not connected.
•
Cloning from USB to TV
: This to downloads the stored data in the USB device to TV set.
1.
Insert a USB drive into the USB port on the rear of the TV.
2.
Enter the Interactive menu by pressing buttons in order:
MUTE
→
1
→
1
→
9
→
ENTER
3.
Press the
▲
or
▼
button to select “Clone USB to TV”, then press the
ENTER
button.
4.
When the message “Clone USB to TV” is displayed, then press the
ENTER
button.
5.
You can Make sure USB cloning behavior.
•
In Progress
: copying data to TV.
•
Completed
: copy finished successfully.
•
Failed
: copy did not finish successfully.
•
No USB
: USB is not connected.
•
No File
: there is no file to copy on the USB.
✎
Activate copying from USB to TV by pressing
ENTER
key for 5 seconds.
✎
The Hotel TV product family does not support the
CLONE
function between models that supports the satellite /
T2 operation and models that do not.
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
