23
English
Hotel TV Function
Description
Category
Item
Initial value
Logo/
Message
Welcome Message
OFF
displays on Welcome Message.
Edit Welcome
Message
Edit the Welcome Message.
Hospitality Logo
OFF
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo
is displayed, before the signal from the initial source, for the amount of time set in
"Logo Display Time"
Hospitality Logo DL
...
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Logo Display Time
...
Set the logo display time (3/5/7 Seconds).
Cloning
Clone TV to USB
Clone the current TV option values to a USB memory device.
Clone USB to TV
Clone the saved TV option values in a USB memory device to the TV.
Setting Auto Initialize
OFF
When Setting Auto Initialize is set to On, and the power is turned off and on or the
Master Power is turned off and on, the data is restored to the cloned values. If there
is no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored
and the operation will be the same as that whenSetting Auto Initialize is set to Off.
REACH
Solution
REACH 3.0
OFF
• ON: The feature of REACH 3.0 in this TV becomes available.
• OFF: The feature of REACH 3.0 in this TV becomes not available.
REACH Channel
…
Assign a DTV channel number to carry the update REACH data. This channel number
must be the same as the number set on the Reach server.
Group ID
…
Select the Group ID of the REACH server.(Refer to the REACH server manual for
more details.)
Ticker
OFF
• ON: The Ticker content is displayed.
• OFF: The Ticker content is not displayed.
REACH Update
Time
…
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
1hour Every hour
2hour: Every 2 hours
12:00 am: every 12:00 a.m.
2:00 am: every 2:00 a.m.
12:00 pm: every 12:00 p.m.
2:00 pm: every 2:00 p.m.
REACH Update
Immediate
…
• ON: Whenever the TV enters standby mode (the power cord is plugged in and the
power is off), the REACH data is updated on the TV.
• OFF: The REACH data is only updated on the TV at the REACH server update time.
Room Number
…
Set the Room Number.
REACH Server
Version
…
The version of REACH Server is displayed.
Network
Network Setup
Set an IP address to establish an Internet connection.
SmartHub Model
Setting
Set SmartHub Model.
SmartHub Setting
Set up SmartHub.
Widget
Solution
Widget Mode
ON
Widget Mode ON/OFF.
Solution Type
Vendor
Server
Select type of solution (Vender Server/ SINC Server).
Server URL Setting
Set server URL.
License Server IP
Setting
Set server IP.
IPTV Mode
ON
IPTV mode On/Off.
Virtual Standby
OFF
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
Instant On
OFF
Setup booting mode.
Room Num Setting
Set Room Number.
