QUICK START GUIDE
VARIA-ACS-810A
8” & 10.1” Angle-Select Tabletop Stand
VARIA-ACS-150A
15.6” Angle-Select Tabletop Stand
© 2023 HARMAN. All rights reserved. SmartScale, NetLink, Enova, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered
trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective
companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time. The
AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com .
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
1000374846 REV:C
Last Revised 2023-03-23
FIG. 7
Mounting Plate; Slot & Set Screw Locations
8.
Select the best angle for installation. The Angle-Select Tabletop Stand
can be installed at one of three (3) angles:
a.
Upright 60° angle
b.
Mid 45° angle
c.
Low 30° angle
30° position
[Most Horizontal]
45° position
60° position
[Most Upright]
FIG. 8
Mounting Plate; Install Angle Options
9.
Insert the base into the desired position. Insert the tab first and set
flat against the mount.
10.
Install the supplied set screw to lock the base in the desired position.
FIG. 9
Varia Touch Panels on Angle-Select Tabletop Stand, various angles
Removing
To remove the panel, follow the installation directions in reverse.
Slots
Set Screws
