Connectivity
103
›
Receive data using the Bluetooth wireless
feature
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Bluetooth settings
→
Visible
.
Your device is visible to other Bluetooth devices for 120
seconds.
When prompted, enter the PIN for the Bluetooth wireless
2
feature and select
OK
(if necessary).
Select
3
Accept
to confirm that you are willing to receive
data from the device.
Received data is saved to the bluetooth folder. If you receive a
contact, it is automatically saved to the phonebook.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and is
intended for use in all European countries. The WLAN
can be operated in the EU without restriction indoors,
but cannot be operated outdoors in France.
Summary of Contents for GT-I9100T
Page 2: ...GT I9100T usermanual ...