Connectivity
102
Connect to a WLAN AP using a Wi-Fi Protected
›
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
In Idle mode, open the application list and select
1
Settings
→
Wi-Fi.
Select a network indicated as protected network available,
2
and select the check box next to Show advanced
options.
Select the
3
WPS drop-down menu.
Select
4
Push button
→
Connect.
Press a WPS button on the access point within 2 minutes.
5
To connect to a Wi-Fi AP with a WPS PIN,
In Idle mode, open the application list and select
1
Settings
→
Wi-Fi.
Select a network indicated as protected network available,
2
and select the check box next to Show advanced
options.
Select the
3
WPS drop-down menu.
Select
4
PIN from access point or PIN from this device
→
Connect.
On the access point, enter the PIN and press the start
5
button.
Summary of Contents for GT-I9100G
Page 1: ...GT I9100G usermanual ...