GH15DS
4-1
4 Troubleshooting
Notes:
1. Before troubleshooting, setup the PC’s display as below.
• Resolution: 1024 x 768
• H-frequency: 48 kHz
• V-frequency: 60 Hz
2. If no picture appears, make sure the power cord is correctly connected.
3. Check the following circuits.
• No raster appears: Main PCB
• 12V develop but no screen: Main PCB
• 12V does not develop: Main PCB
4. If you push and hold the EXIT button for more than 5 seconds, the monitor automatically turns back
to the factory preset(GH15DS).
4-1 Power
Does proper DC 12 V
appear at CN100?
Check Power Adaptor.
Yes
No
Does proper DC 5 V appear at
output Pin of IC100?
Check IC100 and related circuit.
Check IC101, IC102, IC601, IC401
and related circuit.
Yes
No
Yes
Does proper 3.3 V - signals
appear at output Pin of IC103?
Check IC103 and related circuit.
No
Yes
Does proper 3.3 V - signals
appear at Pin 7 of CN100?
Check CN100-7 and related circuit.
No
Yes
Does proper 3.3 V - signals
appear at R300?
Check IC301 and related circuit.
No
Summary of Contents for GH15DS
