![background image](http://html.mh-extra.com/html/samsung/galaxy-s-blaze-4g/galaxy-s-blaze-4g_user-manual_339899218.webp)
214
Activating Visibility
䊳
Press
➔
and then tap
(
Settings
)
➔
Wireless and network
➔
Bluetooth settings
➔
Visible
.
The device is now activated for discovery other devices for
a period of time determined by the value set within the
Visible time-out menu.
Note:
Your device visibility is based on the time set within the Visible
time-out field (2 minutes, 5 minutes, 1 hour, or Never). This value
appears as a countdown within this
Visible time-out
field.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1.
Press
➔
and then tap
(
Settings
)
➔
Wireless and network
➔
Bluetooth settings
➔
Scan for devices
. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
2.
Tap a device name to pair with the device.
Important!:
Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3.
Enter a PIN to pair with the device, if one is required, and
tap
OK
.
USB Utilities
1.
Press
➔
and then tap
(
Settings
)
➔
Wireless and network
➔
USB utilities
➔
Connect storage to
PC
.
2.
If prompted, tap
OK
to turn USB debugging mode off.
3.
Plug in a compatible USB cable to begin using the device
for mass storage mode.
USB Tethering
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note:
You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to:
http://www.samsung.com/us/support/
downloads
.
䊳
Press
➔
and then tap
(
Settings
)
➔
Wireless and network
➔
USB tethering and Mobile HotSpot
.
For more information, refer to
“USB Tethering”
on page 202.