43
Notes on Usage
Draining water when the product gets wet
• If the product gets wet, make sure to drain water
from the tray eject hole, mouthpiece/microphone
(upper/lower) holes, receiver/speaker, speaker,
keys, headset connection terminal and external
connection terminal.
• Continued use will present a risk of getting your
clothes/bag wet or make it harder to hear the
sound.
• Follow the steps below to drain water.
a
Hold the product
firmly and wipe off
moisture on the
product surface
and back side with
dry, clean cloth etc.
b
Shake the product
approximately 20
times, firmly holding
it, until there is
no more water
splattering.
c
Swing the product about 20 times against a
dry, clean cloth etc. to wipe off water remaining
in the mouthpiece/microphone (upper and
lower), receiver/speaker, speaker, keys,
headset connection terminal, etc.
d
Wipe off water drained from the product with
dry, clean cloth etc., and dry naturally.
Water, if any, remaining in the product may ooze
up after wiping off.
Do not wipe off water remaining in gaps directly
with a cotton swab etc.
