Samsung FX510BGS Installation Manual Download Page 4

Page: 4 / 40

_ safety instructions

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

If the information in this manual is not followed exactly, a fire explosion or

electric shock may result, causing death, personal injury, property damage or

loss of life.

–

Do not store or use gasoline or other flammable vapors and liquids in the

vicinity of this or any other appliance.

–

WHAT TO DO IF YOU SMELL GAS:
• DO NOT try to light any appliance.

• DO NOT touch any electrical switch.

• DO NOT use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

–

Installation and service must be performed by a qualified installer, service

agency, or the gas supplier.

ANTI-TIP DEVICE

WARNING

ALL RANGES CAN TIP, RESULTIONG IN PERSONAL

INJURY.

TIPPING RANGES CAN CAUSE BURNS FROM SPILLS,

PERSONAL INJURY, AND/OR DEATH.

INSTALL AND CHECK THE ANTI-TIP BRACKET

FOLLOWING THE INSTRUCTIONS AND TEMPLATE

SUPPLIED WITH THE BRACKET.

(Install)FX710BGS_FX510BGS_DG68-00357A-01_EN_120706.indd 4

2012-07-09 �� 4:45:46

Summary of Contents for FX510BGS









































Search results

Summary of Contents for FX510BGS

Reviews:

Related manuals for FX510BGS

Brands by name

Popular brands

Samsung FX510BGS, Installation Manual

Search results

Summary of Contents for FX510BGS

Reviews:

Related manuals for FX510BGS

Brands by name

Popular brands