English - 36
Changing the Position of the PIP Window
4
Press the ▲ or ▼ button to select
Position
, then press the
ENTER
button.
Press the ▲ or ▼ button to select the desired PIP window position, then press
the
ENTER
button.
➢
In Double Window ( ) and Double Wide ( ) modes, Position cannot
be selected.
➢
If the PIP window is set to Double Window ( ) or Double Wide ( )
mode, the screen size or alignment may slightly differ depending on the
signal type.
Changing the PIP Channel
5
Press the ▲ or ▼ button to select
Channel
, then press the
ENTER
button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired
channel in the PIP window, then press the
ENTER
button.
➢
MAIN: HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
Press the
EXIT
button to exit.
Press the
PIP CH
and
CH
buttons on the remote control to change the PIP
channel.
Freezing the Current Picture
1
Press the
STILL
button to freeze a moving picture.
➢
Normal sound will still be heard. Press again to cancel.
➢
To prevent screen burn-in, this function will automatically cancel after 5
minutes.
➢
While V-Chip is in operation, the Still function cannot be used.
RETURN
FAV.CH AUTO PROG. ADD/DEL
PIP
: On
Size
:
Position
:
Channel
: Air 10
PIP
T V
Enter
Move
Return
RETURN
FAV.CH AUTO PROG. ADD/DEL
PIP
: On
Size
:
Position
:
Channel
: Air 10
PIP
T V
Air 10
▲
▲
Enter
Move
Return
BN68-01094W-01Eng.indb 36
2007-10-08 ¿ÀÈÄ 6:05:17