Samsung Flip WM55B, User Manual

Page: 47 / 76

47
Printing
To print, you must set up the Print Server and the Clock Set .
To set up the Print Server , the product and the printer you want and your PC must be
connected to the same network.
Flip Printing Software must be also installed on the PC connected.
"
For information about how to connect to a network, see “ Connecting to a network ”.
"
You can set up the Print Server at Menu → SETTINGS → Connect → Advanced Settings →
Print Server .
"
You can set Clock Set at Menu → SETTINGS → System → Time → Clock Set .
"
The Flip Printing Software is available on the website
- http://displaysolutions.samsung.com
- http://www.samsung.com
"
Devices that transfer files, such as virtual printers ( PDF , XPS , One note , etc.) or fax
machines, are not supported, but only printers that can print actual paper are supported.
"
For print paper size, only A4 is supported.
Installing Flip Printing Software
Follow the onscreen instructions to install Flip Printing Software .
"
The installation takes about 10 minutes, and the time taken may vary depending on your
PC environment.
PC installation requirements
• Supported operating systems:
Windows 7(32/64 bit), Windows 10(32/64 bit), MAC
"
When installing the software, make sure that critical Windows updates are already
installed. Update Windows to the latest version before beginning the setup.
"
For Windows 7, make sure that Service Pack 1 is already installed.
Setting up the printer
After the Flip Printing Software is installed, make the following settings on the product
onscreen menu.
Setting up automatically
1
Select Menu → SETTINGS → Connect → Advanced Settings menu.
2
Select Print Server → Connect to Server → Auto .
Setting up manually
1
Select Menu → SETTINGS → Connect → Advanced Settings menu.
2
Select Print Server → Connect to Server → Manual , and then enter the Server IP address
and the Server Port number of the PC where Flip Printing Software is installed.