Samsung FlexWash WR24M9960K Series User Manual Download Page 19

Page: 19 / 84

Installation

English

Accessories (supplied)

Bolt caps

Hose guide (x 2)

Tie straps

Aqua Pebble

Water hoses (sold

separately)

Spanner

Accessories (not supplied)

You must purchase these items at a local service center.

Anti-slip pads (sold separately)

Pedestal (flex system only)

NOTE

•  The number (7 to 9) of bolt caps provided depends on the model.
•  The appearance of the washer and provided accessories may differ by model.
•  To purchase an accessory or lost part, contact a local Samsung service center or your

retailer.

• “WE272N*” is a pedestal dedicated to the flex system.

CAUTION

• Do not reuse old water hoses, which may leak or burst, causing flooding and/or

property damage.

• Make sure rubber washers are inserted in each coupling of both water hoses.

FlexWash(COMBO)_03768N_India_EN.indd 19

5/12/2017 5:53:24 PM

Summary of Contents for FlexWash WR24M9960K Series





















































































Search results

Summary of Contents for FlexWash WR24M9960K Series

Reviews:

Related manuals for FlexWash WR24M9960K Series

Brands by name

Popular brands

Samsung FlexWash WR24M9960K Series, User Manual

Search results

Summary of Contents for FlexWash WR24M9960K Series

Reviews:

Related manuals for FlexWash WR24M9960K Series

Brands by name

Popular brands