Samsung FlexWash WR24M9940K Series User Manual Download Page 60 | Manualshive

Page: 60 / 84

background image

Maintenance

Maintenance

English

60

Upper washer

Eco Tub Clean

Eco Tub Clean is a self-cleaning cycle that removes dirt and bacteria that may occur inside
the tub. We recommend running Eco Tub Clean every 20 washes.

1.

Make sure the tub is empty.

2.

Press

POWER

.

3.

Press

Eco Tub Clean

.

4.

Press and hold

START/PAUSE

.

CAUTION

• With Eco Tub Clean, you can clean the tub without using detergent.
• Only use Eco Tub Clean when the tub is empty. This may cause damage to the laundry

or a problem with the washer.

Eco Tub Clean reminder (

)

• The Eco Tub Clean reminder (

) appears on the main display once every 20 washes.

We strongly recommend that you perform the Eco Tub Clean regularly. Remove the
laundry from the washer, turn the washer on, and clean the tub by running Eco Tub
Clean.

• If you do not run Eco Tub Clean, the Eco Tub Clean indicator turns off. However, the

indicator will light again after five washes. Not running Eco Tub Clean at this point will
not cause a problem with the washer. However, we strongly recommend running Eco
Tub Clean at this point.

• Although the Eco Tub Clean indicator turns on once a month or so, the frequency may

differ depending on the number of times the washer is used.

Fabric softener

By design, the fabric softener compartment on the upper washer is not removable to
facilitate visual feedback to users. To clean the softener compartment, follow these
instructions:

1.

Open the top door, and then remove

the softener cap.

FlexWash(COMBO)_DC68-03768S-00_EN.indd 60

2017-10-12 6:39:17

«
...
58
59
60
61
62
...
»

Summary of Contents for FlexWash WR24M9940K Series





















































































Reviews:

No comments

Related manuals for FlexWash WR24M9940K Series

Brand: Haier Pages: 38

Brand: STERWINS Pages: 18

Brand: SIP Pages: 16

Brand: Blue Clean Pages: 20

Brand: Meiko Pages: 48

Brand: Dawlance Pages: 4

Brand: GE Pages: 70

PRO-POWER POWERWASH 150 HQ

Brand: VITO Pages: 52

Brand: Smeg Pages: 12

Brand: Lavorwash Pages: 20

Brand: Kärcher Pages: 394

Brand: Icecool Pages: 112

Brand: Ardo Pages: 36

Brand: Indesit Pages: 72

Brand: Smeg Pages: 31

Brand: Hoover Pages: 88

Brand: Kuppersbusch Pages: 28

WF8804FS(A/F/G/H/S/V/W/Z)

Brand: Samsung Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands