Connecting the connection cord
Wiring Diagram
The indoor unit is powered from the outdoor unit via the connection cord.
Remove the screw on the electrical component box and remove the cover
plate.
1
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
2
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
3
Reassemble the electrical component box cover, carefully tightening the
screw.
4
Indoor Unit
Outdoor Unit
Communication
Power
When connecting the cables, you must pass them through
the cable clamp to fix them securely.
Connect the Connection Cord as seen
as
picture ,
and the torque of screw is 40~70kgf•cm .
Note
E-
15
ENGLISH
Summary of Contents for FH052EAMC
Page 26: ......
