9
Preparations
Chapter 02
Installation
Attaching the Stand (F27G3*T*)
1
3
4
2
1
2
The mounting completes.
Take out the base and lock it on the
bracket with 6 screws as shown in
the figure.
Place the stand neck on the display, as shown in the
figure. When you place the stand neck, ensure that
the two guides on the stand neck can be inserted into
the groove of the display. Then press the stand neck
downwards until the raise button on the stand neck
insert into the groove of the display.
Place the protective Styrofoam (cushion)
included in the package on the floor and
place the product facing down on the
Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick
sitting mat.
Attaching the Stand (F24G3*T*)
1
3
4
2
1
2
The mounting completes.
Take out the base and lock it on the
bracket with 5 screws as shown in
the figure.
Place the stand neck on the display, as shown in the
figure. When you place the stand neck, ensure that
the two guides on the stand neck can be inserted into
the groove of the display. Then press the stand neck
downwards until the raise button on the stand neck
insert into the groove of the display.
Place the protective Styrofoam (cushion)
included in the package on the floor and
place the product facing down on the
Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick
sitting mat.
