Samsung ER-650 Operation And Program Manual Download Page 18

Page: 18 / 255

Samsung ER-650

Getting Started

•

Control Lock

VOID

PGM

REG

OFF

VOID

OFF

REG

PGM

Use to void (correct) items outside of a
sale.

The register is inoperable.

Use for normal registrations.

Use to read register reports and
perform other manager functions.

Use to read register reports and reset
totals to zero.

Use to program the register.

Service Mode used for tests and special
settings.

The Samsung ER-650 includes two sets of keys that

FDQ

be used to access the

following key lock positions.

Key

Positions Accessible

VOID, OFF, REG, X

REG

OFF, REG

OFF, REG, X, Z

VOID, OFF, REG, X, Z, PGM

ALL POSITIONS

Note: Keys

FDQ

be removed from the key lock in the OFF or REG positions.

Summary of Contents for ER-650
































































































































































































































































Search results

Summary of Contents for ER-650

Reviews:

Brands by name

Popular brands

Samsung ER-650, Operation And Program Manual

Search results

Summary of Contents for ER-650

Reviews:

Brands by name

Popular brands