Samsung ER 5215 Page 88 Operator'S Manual Download

Page: 88 / 179

86 • S-Mode Programming

ER 5215 Electronic Cash Register

Update Program Area

1. Connect the Serial Cable From ECR to PC.

2. At the register, turn the control lock to the S position.

3. Turn the power switch to the OFF position.

4. Press and hold the CASH key.

5. While continuing to hold the CASH key, turn the power switch to the ON position.

(The display will show nothing and the error tone will sound.) Release the CASH
key.

6. Press

CLEAR.

7. At the PC, execute the program “Download.exe”. The Download dialog box

displays.

8. Select the appropriate com port connection at your PC at the PORT# option buttons.

9. Click

SEL. find the folder where the update files are located and select ER5215.bin.

10. Select Program code only in the Select One option buttons.

11. Press OK Button. The download takes about 1-2 minutes; the scroll bar will track

the progress of the download.

12. The message Completed displays. Click OK and the Download program will close.

13. At the register, turn the power switch to the OFF.

14. See “Clearing Memory” on page 74 and perform a memory all clear in order to

install the default program.

Summary of Contents for ER 5215




















































































































































































Search results

Summary of Contents for ER 5215

Reviews:

Related manuals for ER 5215

Brands by name

Popular brands

Samsung ER 5215, Operator'S Manual

Search results

Summary of Contents for ER 5215

Reviews:

Related manuals for ER 5215

Brands by name

Popular brands