34 _ Disassembly and Reassembly
Part
Figure
Description
Motor geared
(Vane motor)
Preparation :
•
Remove the case gear.
- Refer to the “Case gear etc” disassembly section
to separate Assy cover base until step 3.
•
Remove the Assy cover base.
- Refer to the “Assy cover base” disassembly
VHFWLRQWRVHSDUDWH$VV\FRYHUEDVHXQWLOVWHS
1. Remove one screws through the window of Assy
cover base.
Remove one screws through the hole of base which
was under the cover gear.
3. Disconnect the wire connector.
4. Pull the motor geared out.
Sensor-vane
Preparation :
•
Remove the Assy cover base.
- Refer to the “Assy cover base” disassembly section
WRVHSDUDWH$VV\FRYHUEDVHXQWLOVWHS
1. By releasing the hook, disassemble the sensor.
