Troubleshooting_35
Check
code
Display
Check
code
Recall
When occur
Symptom
Possible Causes
2&
2&
:KHQWKHRYHUÀRZVHQVRUGDWDLVHTXDOWRRUOHVVWKDQ9
IRUVHFRQGV
- If check code has occurred when set operating, 3times
µPLQGUDLQ¶UHWU\DQGGLVSOD\³2&´1RRSHUDWLQJ
FRQGLWLRQGLVSOD\³2&´ZLWKRXWUHWU\
- During retry 3times, display ‘pause’
- The case brake fails to detect the pulse.
- The valve water is out of order.
1R
display
dC3
,QFDVHWKH$XWR'RRU2SHQGHYLFHRSHUDWHV
When the door opening is not sensed.
$XWR'RRU2SHQGHYLFHDFWLRQUHWU\WLPHV
- Keep going remained cycle
- The touch button is out of order.
- The sub PBA or touch button PBA is not
properly connected.
1R
display
)&
:KHQ)DQ0RWRU5SPLVPHDVXUHGOHVVWKDQUSP
)DQPRWRUDFWLRQUHWU\WLPHV
- Keep going remained cycle
3C
3C,
&a
3C6
Condition 1)
When Main receives the Circulation pump check code
from the inverter, stop the drive the motor and restart
again.
,I0DLQUHFHLYHWKHPRWRUFKHFNFRGHWLPHVWXUQRႇ
WKHPRWRUIRUPLQXWHV$WWKHWKLUGUHVWWLPHFKHFNFRGH
RFFXUV:KHQFKHFNFRGHDWHULVVWRSSHG
LPPHGLDWHO\$QG+HDWHU21DIWHURSHUDWLQJWKHFLUFXODWLQJ
PRWRUVHFRQGV
Condition 2)
:DVKLQJ5LQVLQJDUHD:KHQ7DUJHWUSPLVUSP
or more and Circulation pump speed is 2400rpm or less
continuously for three seconds, the operation is stopped.
Retry 2 times in 3 seconds. When sensing 3 times,
,QYHUWHULVWXUQHGRႇDQGUHWU\LQPLQXWHV
At the third rest time, check code occurs.
,IWKHFRQGLWLRQRI/RZOHYHOZDWHUVHQVLQJWKLVFKHFN
FRGHLVLJQRUHG
- The driving part stops.
- Retry until 2nd time, and 3rd display check code.
- A foreign object has entered the Circulation
pump and the pump is stuck.
- The Circulation pump is out of order.
- The Main PBA is out of order.
- The Inverter PBA is out of order.
1R
display
&
- When the number of detected water supply pulses are
DWWKH1RQZDWHUVXSSO\PRGHĺ5HSHDWVZDWHU
YDOYHRQVHFRQGVRႇVHFRQGVWLPHV
- Keep going remained cycle
- The water valve out of water.
