Disassembly and Reassembly _ 27
Part
Figure
Description
Bracket front
lower
Preparation:
• Make sure to disconnect the power, water supply,
and drain hose connections.
•
5HPRYHWKHXSSHU ORZHUEDVNHWVLQWKH
dishwasher.
•
3XOORXWWKHGLVKZDVKHU FDUHIXOO\OD\WKH
dishwasher down on its back.
•
5HPRYHWKHZDWHUVXSSO\OLQH HOERZ
Caution
0DNHVXUHWRWXUQWKHZDWHUVXSSO\RႇEHIRUH
removing the water supply line.
1. Remove the cover PCB and pull out the case PCB
without disconnecting wire connectors.
:KHQUHPRYHWKH3&%OLIWXSWKHWZRFODVSV
XQGHUWKHEDVHE\XVLQJDÀDWWLSVFUHZGULYHULQD
OHYHUHႇHFW
3XOORXWWKHFDVH3&%DQGVHFXUHLWWRWKHEDVH
using duct tape. Shown in the image to the left.
3. Remove the four (4) screws on both sides of the
bracket front lower.
4. The guide wire is attached to the bracket front lower
with three hooks. Use a pair of needle nose pliers or
ÀDWVFUHZGULYHU
8VLQJD3KLOLSVVFUHZGULYHUOLIWXSWKHHDFKFODVS
on both sides of the bracket front lower.
6. To remove the bracket front lower entirely, grab the
top of the bracket front lower (on both sides) and pull
the top out. At the same time, push the bottom of the
bracket front lower (on both sides) in towards the
unit.
ఐ
Reassembly is in the reverse order of the removal.
