English
34
Oper
ations
Operations
Settings
You can change the sound, Auto Release™ Dry alert, Rinse aid amount, and Auto Release™
Dry settings to your preference. To change the settings, press the
Sanitize
and
Delay Start
buttons simultaneously for 3 seconds. Press
Sanitize
to navigate through the sub menus,
and then press
Delay Start
to confirm your changes.
Sound
U1/U0
Auto Release™
Dry alert
J1/J0
Rinse aid amount
F0~F6
Auto Release™
Dry
A1/A0
After setting is finished, press
Power
button or
Sanitize
and
Delay Start
buttons.
Sound
Press
Sanitize
until '
U0
' or '
U1
' is displayed. To mute the dishwasher, select '
U0
', and then
press the
Sanitize
and
Delay Start
buttons at the same time or the
Power
button. To
unmute, select '
U1
', and then press the
Sanitize
and
Delay Start
buttons at the same time or
the
Power
button.
Auto Release™ Dry alert
You can enable or disable the setting that alerts you when the door opens to start the Auto
Release™ Dry function.
Press
Sanitize
until '
J1
' or '
J0
' is displayed. To disable the Auto Release™ alert, select '
J0
',
and then press the
Sanitize
and
Delay Start
buttons at the same time or the
Power
button.
To enable, select 'J1', and then press the
Sanitize
and
Delay Start
buttons at the same time
or the
Power
button.
Rinse aid amount
Press
Sanitize
until
‘F0~F6’
is displayed. The higher the number, the more rinse aid the
dishwasher uses. To improve drying performance, select a higher number.
If your dishes appear discolored after a wash, switch to a lower number.
The factory default level is
‘F4’
.
NOTE
For DW80CG502* model, please press
Hi-Temp Wash
instead of
Sanitize
.
DW5000C_DW80CB507012AA_DD68-00261A-00_EN_FULL.indd 34
2023-03-24 12:21:11
